Trio Series | TRIO-PS/1AC/24DC/20

منبع تغذیه تریو پاور فونیکس کنتاکت Phoenix Contact

برند: Phoenix Contact

کشور صاحب برند: آلمان

تولید شده در: چین

ورودی: تک فاز

خروجی: 24 ولت مستقیم / 20 آمپر

ابعاد: 115 * 130 * 152.5 میلی متر

وزن خالص: 2380 گرم

Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/20 A

Input data

Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC (Derating < 90 V AC: 2,5 %/V)
Dielectric strength maximum	300 V AC
AC frequency range	45 Hz ... 65 Hz
Discharge current to PE	< 3.5 mA
Current consumption	4.6 A (120 V AC)
	2.4 A (230 V AC)
Nominal power consumption	533 VA
Inrush current	< 15 A
Mains buffering time	> 13 ms (120 V AC)
	> 13 ms (230 V AC)
Input fuse	10 A (slow-blow, internal)
Recommended breaker for input protection	16 A (Characteristics B, C, D, K)
Power factor (cos phi)	0.99
Type of protection	Transient surge protection
Protective circuit/component	Varistor

Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (U_Set)	22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	20 A (U_OUT = 24 V DC)
Derating	55 °C ... 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	yes
Feedback voltage resistance	35 V DC
Protection against overvoltage at the output (OVP)	< 35 V DC
Max. capacitive load	unlimited
Active current limitation	Approx. 25 A (for short-circuit)
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
	< 2 % (change in load, dynamic 10 % ... 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 10 mV_PP
Output power	480 W
Typical response time	< 1 s
Peak switching voltages nominal load	< 80 mV_PP
Maximum power dissipation in no-load condition	4 W
Power loss nominal load max.	46 W